"Purpose-Built Performance"
208-742-1892
Savage Axis 2 Pro Discrete Picatinny Rail
$37.95
Our Axis2 Pro Discrete Picatinny Rail (SAX2PR), like our SAX2P arca rails, is specifically engineered to perfectly fit your Savage Axis 2 Pro rifle stock. This picatinny rail can be installed as a stand-alone upgrade allowing secure installation of bipods, IR illuminators, etc., or in combination with our Half Arca Rail segment (HSAX2) to provide the ultimate in versatile accessory mounting options!
And the best part is, it only takes minutes to install with the included installation kit and basic hand tools.
The installation kit includes a 3D printed wedge that perfectly matchs the recessed sling swivel notch in the Axis 2 stock. The pic rail and this filler wedge mount with a provided screw in the factory sling swivel location.
Installs in about 2 minutes with basic hand tools, no drilling or other modifications needed.
The rail measures 2.8” with 5 fully usable slots.
Made in the USA from 6061 T6 aircraft grade aluminum for a perfect balance between strength and lightweight.
Sling mounting is moved to the front of the rail with a post style mount which is compatible with any standard sling swivel stud style attachment hardware.
Quantity
Compatibility:
The SAX2PR fits standard Savage Axis 2 Pro rifles with polymer stocks that have a recessed front sling swivel
Installation Instructions:
Installing the SAX2PR on your Savage Axis 2 Pro rifle is very straight forward.
- First remove the factory forward sling swivel and compression washer.
- Fit the 3D printed wedge block in the sling swivel recess to determine its proper orientation (it only fits in one direction).
- Snap the wedge block onto the pic rail segment, ensuring that the sling swivel mount is facing forward, and line-up the mounting screw hole.
- Place the snapped together unit into the recessed notch, install the provide mounting screw through the pic rail, wedge block, and into the sling swivel hole in the stock.
- Ensure the front set screw is not protruding below the bottom of the rail and tighten the mounting screw with medium force.
- Once the rail is tightened down on the wedge block and stock, start to drive the set screw into the stock until the screw is almost flush with the top of threaded hole (1.5 threads still showing above the hole).
- With a rubber mallet (or other means of protecting the rail) gently rap the front of the rail to set the point of the screw into the stock. Continue to tighten the set screw until flush with the top of the treaded hole. Your pic rail is now properly installed!